Ace and Jig Inspired Zadie Jumpsuit

Oooooookay, get ready for a photo overload because this Paper Theory Zadie Jumpsuit is the most “me” thing I’ve ever made and I’m in love. I mean, the woman in these photos is who I am (style-wise) in my dreams. Just a jumpsuit wearing, hat sporting, smiling woman casually strolling through the great outdoors. Forgive me if I can’t adequately communicate my feelings in this post. Hopefully the photos will fill in where my words fail.

Inspiration

Ace and Jig is a company that’s inspiring not only for their designs, and unique fabrics but also for their core values. I’m sure they’re already on your radar, but if not, check them out. While I adore the company, I know I’m not alone in saying that I just don’t have upwards of $300 to spend on one item of clothing that may or may not fit my unique body type. Considering my height of 5’10” and hips that are 3-4 sizes larger than my bust, a well-fitting ready-to-wear jumpsuit is something I’ve never found. Last year when browsing Pinterest, I came across this Ace and Jig Wrap Jumper and knew it was something I wanted to recreate for my wardrobe. The comparison below illustrates how differences between these two jumpsuits give them a similar vibe while still maintaining their own unique features. We’ll call them jumpsuit cousins.

Fabric

It’s no secret that I’m a bit of an Anna Maria Horner superfan (just click the Anna Maria Horner tag at the bottom of this post and you’ll see what I mean). While I’ve pretty much never met an AMH fabric I didn’t like, her Loominous and Loominous II lines will forever be favorites. Both lines consist of multiple patterns made with 100% cotton yarn-dyed woven fabric. Green is my preferred color and I love the dimension the mustard and teal dots add to the forest green background. In order to make this jumpsuit, I purchased 5 yards of Slightly in Forest from Flying Bulldogs on Etsy. That amount turned out to be plenty and when all was said and done, I had about 1 yard left over. Now, what should I do with that extra yard?

Sizing and Alterations

This version is my second Zadie Jumpsuit after making a wearable muslin from a rayon poplin. My first version included all my regular alterations and kept the wide legs as drafted. I made a few changes to this second version so let’s get to it.

 

 

 

 

 

View this post on Instagram

 

 

 

 

 

 

 

 

 

I often wait to wear a handmade outfit until it’s been properly photographed and blogged. Last night, however I made an exception and wore my @paper_theory #zadiejumpsuit on our anniversary date. Paired it with a #wikstenhoari because restaurants are always too cold. ____________________________________ Fabric: rayon poplin purchased from @harts_fabric ____________________________________ #memademay2019 #mmmay19 #summersewing #isew #handmadestyle #sewingissexy #createeveryday #papertheory #indiesewing #sewnwithhart #hartsfabric

A post shared by Nicole Merritts (@nf_merritts) on May 19, 2019 at 8:16am PDT

As far as sizing for this version goes, I chose a size 8 at the chest and graded to a 12 at the hips and below. I added 1/2″ of length to the bodice and 4 inches of length to the legs. Next time I’ll likely add an extra inch for a total of 5 inches added to the legs.

To achieve my desired look, I also tapered the the legs. Starting just below the crotch curve, I slightly angled each side seam until I’d taken them in by 2 and 5/8″ on each side of both the front and back pieces (that’s a total of 10 and 1/2″ taken out of each leg at the bottom near the hem).

Construction

The only closure on the Zadie Jumpsuit is the tie front, making construction quick and mostly painless. This was sewn in small increments over about three days’ time. The only difficulty I encountered were a few spots on my bias binding where I didn’t quite catch the back side. I simply fixed those two areas (each shorter than an inch) and didn’t even bother unpicking the first set of stitches because they’re hardly noticeable. If someone is getting that close to my chest, an extra row of stitching will be the least of their worries.

My only change to the construction was in the hem finishing. The pattern instructs that the sleeve hems are just turned in 1cm which would leave a raw or exposed serged edge on the inside of the hems. Instead I chose to turn the hems inside by 1/4″ and then another 1/4″ so the serged sleeve edges are completely enclosed. This is simply personal preference, not a necessity. I just thought it provided a more professional looking finish.

Conclusions

The Zadie Fever is a sewing community phenomenon for good reason. Both of my versions are the most comfortable woven jumpsuits in my decent sized jumpsuit collection. The pattern is a quick, simple sew with big impact results. If I make this pattern again, I may try to convert the pleats in the back bodice and back pant into darts. I’m not in love with the bulk of the pleats but, it’s not a deal breaker for me either. These jumpsuits will no doubt be worn to death over the summer months. I’m also looking forward to working them into my wardrobe year-round. With those thoughts, I’ll conclude today’s jumpsuit lovefest. Now, I’m off to work on my next project which also includes AMH Loominous fabric and inspiration from Ace and Jig. See you Monday with the details.