Suit Up for Summer 2020 with Raspberry Creek Fabrics

Disclaimer: The fabric for this post was provided to me by Raspberry Creek Fabrics. However, all words and opinions are my own.

Hello! It’s been a minute. This year seems determined to keep everyone on their toes. Posting about swimsuits at this time may feel a bit frivolous but, projects such as this one are keeping my spirits up. Truthfully, without deadlines, I’m not sure that I’d be able to focus on much of anything at the moment. Enough about my state of mind, let’s talk about these suits.

Fabrics

• 

• 

• 

I personally had a hard time narrowing down my favorite prints from the Raspberry Creek 2020 swim line. My son, on the other hand, immediately knew that he wanted this banana print. I eventually figured it out and selected the tangerine micro stripe and leopard print for my suits.

Note: For this week only, you can use the code: SWIMTOUR for 15% off swim fabrics only over at Raspberry Creek Fabrics. 

Palm Euro Suit

I’ve made no less than ten Sew Like My Mom Palm Euro Suits since the pattern was released two years ago. This kid LOVES them. I love that they use a relatively small amount of fabric and can be sewn up in 30-45 minutes. The banana pair below is a straight size 6 with a 7 length in the jammers option.

• 

• 

Women’s Top #1: Belen Bodysuit Top Hack

This swimsuit wasn’t actually a planned pairing. Once I finished my son’s banana print jammers, I had a bit of the banana print left and decided to use it as a practice for recreating a coveted ready-to-wear suit (here). Since sewing my first Belen Bodysuit last fall, I’ve wanted to use the pattern as a base for swimwear. This hack provided the perfect opportunity.

• 

• 

Cutting

For this hack, you simply need the bodice front and bodice back pieces from the Belen pattern.

• Remove 4 inches from bottom of front and back bodice pattern pieces.
• Cut 1 front bodice and 1 back bodice from main swim fabric.
• Cut 1 (2 if adding removable swim cups) front bodice and 1 back bodice from swim lining.
• Cut one strip of swim fabric 5″ x (circumference of bodice bottom + 14″) for bottom band. For reference, this ended up being 5″ x 37″ for me.

Construction

Optional: If adding removable swim cups, use your two front bodice lining pieces to create openings for your swim cups. I used the directions in this post as a guide, omitting the under bust elastic.

1. Follow sleeveless Belen Bodysuit bodice instructions.

2. Baste or serge bodice and bodice lining together at the bottom.

3. Fold bottom band right sides together, cut short sides at an angle if desired.

4. Using a 3/8″ seam allowance, stitch along short sides and 8″ in from each end of the bottom band long sides. Turn right side out.

5. Mark your center front with a pin. Starting 1/2″ from center front, pin the bottom band top to the bodice bottom all the way around to 1/2″ away from the center front. This should leave a 1″ gap at the bottom of your center front bodice with 7 and 1/2″ of the stitched band ends hanging free at center front. See photos below for reference.

Women’s Top #2: Alexandria Swimsuit Top

The top was inspired by a pin on my Apparel Sewing and Inspiration Pinterest board. In search of a tie front wrap swim top, I settled on and purchased the Made for Mermaids Alexandria Swimsuit pattern. It’s a one-piece swimsuit but, there’s a top hack tutorial on the M4M blog meaning the guesswork was done for me.

• 

• 

Sizing

The Alexandria is the first Made for Mermaids pattern that I’ve used so the sizing system is new to me. The sizes are colors and coincide with the color of the lines on the PDF pattern pieces. Following the pattern measurements, I opted to sew a size purple bust graded to an indigo at the waist.

Sewing

This was the part of the Alexandria that wasn’t my favorite, mostly due to my own errors and the fact that I generally prefer my swimwear sewing to be a little less involved. Construction took somewhere around four hours. Here’s where I admit that I went a little rogue and didn’t actually follow all the steps outlined in the pattern or hack tutorial. This would be my downfall. There was a brief moment when it came time to hem the bottom of the swim top that I wasn’t sure it would work. I got creative and made it work, but learned my lesson about following the directions. Learn from my mistakes.

Cottesloe Swim Bottoms

After getting creative with my swim tops, I decided to keep it simple with the bottoms. I used high waisted option of the Megan Nielsen Cottesloe Swimsuit pattern for both pairs. Both have the waistband omitted and are a size 10 at the waist graded to a 12 at the hips. Each took about an hour to assemble.

There you have it! Five pieces, two hacks, three full suits, and a few mix and match options as well. Looking forward to the future has seemed bleak as of late but, these suits have me hopefully looking forward to a time when we can wear them outside of our garage. If, like me, you’re in need of a little sunshine in your life at this time, click the blog links below for swim inspiration coming your way all week.

Thanks for reading!