Posted on

Suki Robe and Arenite Pants with Indiesew

Disclosure: The fabric for my pants and the Suki Robe pattern were provided to me by Indiesew in exchange for this post. All opinions are my own.

Hello! Today I’m back with my third post as part of the 2019 Indiesew Blogger team. Just now I realized that all of my Indiesew posts have somewhat of a “something old, something new” theme. In each one, I’ve shared a previously sewn pattern and a new to me pattern. It’s a fairly true reflection of my sewing practice as it’s never simply one or the other. There’s a feeling of calm and comfort that comes from knowing a pattern inside and out whose only rival for my attention is the excitement of beginning a new project. Today’s contenders are the Sew Liberated Arenite Pants and the Helen’s Closet Suki Robe. I’ve styled them together, separately, and brought in some reinforcements from previous posts to give them each fighting chance.

Arenite Pants

Styled with an Archer Button Up (from this post), clogs, and my current favorite hat, these slim hack Arenite Pants are ready to put their best foot forward (or would it be leg in this case??).

Fabric

The moment I saw this Tencel Jacquard in Olive Green (also available in Icy Blue) posted on Indiesew’s Instagram grid (this post), I knew it had to be mine. Tencel, texture, and green? Sold! I was not disappointed when it arrived at my doorstep a week later. It’s buttery soft with a fluid drape and dreamy texture. As per usual, I demanded my husband feel the luxury of this fabric and he described it as his perfect blanket. He was not wrong. The light weight of the fabric combines with the texture to make it feel simultaneously cool and cozy. I’m seriously considering ordering 1.5 yards, hemming or binding the fabric, and using it as a lightweight throw blanket in my living room. The only caveat? It does shrink slightly as expected with the fabric content. The fabric is 53″ wide. After washing I measured it at 48″ wide. It’s not recommended to dry Tencel in a dryer but, I always do.

Sizing, Alterations, and Construction

Combining all these aspects here because I’ve blogged about this pattern before and you can click here to read my previous Arenite Pants post. Just as last time I sewed these pants, I used the Arenite Pants “slim” hack that Meg of Sew Liberated (@sewliberated) has detailed in her Instagram story highlights. Again, I used a size 6 with all the same alterations detailed in my last post. My only extra changes here were moving the pockets up an extra 1″ and taking in the ankles an extra 1/8″ seam allowance (for a total of 3/4″ SA). This removed a total of 3/4″ from the width of the ankles for a slightly slimmer look.

Construction was quick and easy. Again, I opted to forego the felled seams and simply stitched, then serged and topstitched them. They still feel plenty secure. Without felled seams, the pants took most of an afternoon to construct.

Suki Robe

While a newcomer in today’s battle of the sewing projects, the Suki Robe is ready to give the competition a wake up call. In order to shine, this robe prefers to stand on its own. This means that for the five minutes we took these photos, I was wearing just my underclothing and a robe in a public park, so um, you’re welcome?

Fabric

This fabric “Lillium” was designed by colorful creative, handmade hustler, and Sew Fancy Pants co-conspirator, Katie Kortman for D&H Fabrics. Both Katie and Tammy of D&H have been great friends and supporters over the last year so when I had the chance to support both of them by purchasing this lovely fabric it was a no-brainer. The fabric is a rayon poplin with great drape and a silky hand.

Sizing and Alterations

I chose to sew the mid-calf length and selected a size medium based on my measurements. My only alterations to the pattern were made out of a desire to fit it onto a smaller than recommended amount of fabric (that was also directional) and not actual necessity. I had 2.5 yards of this print and didn’t want any of the flowers to be upside down so I had to get creative with pattern placement. In the end, I removed 1.5″ from the mid-calf length and 1″ from the waist tie length to make everything fit. Neither made too much difference in the final fit so I decided I could do without the extra length.

Construction

Sewing this Suki Robe took about double the time it took to sew the Arenite Pants. While somewhat time consuming, the construction wasn’t terribly difficult and something that can be achieved by either the intermediate/advanced or beginner sewist. Helen’s directions include beginner friendly options for the sleeve bands and collar or more advanced methods with enclosed seams in the those areas. Since I’ve been sewing regularly for about a decade, I’d consider myself somewhat of an advanced sewist and chose the enclosed collar and sleeve bands. The end result was a well-constructed robe of which I can be proud.

Final Scoring

Okay, okay, the truth is: my handmade clothes and the patterns used for them feel a little like children. I don’t love the older one any less just because a newer one came along. They’ve each got qualities that make them unique while not diminishing what makes the other special. I can’t decide between them so I’ll lay out a few categories and let you do the decision making. (Just for clarification, if I ever had more than one actual child, I would not encourage strangers on the internet to vote for their favorite. ) The categories are: Fabric Use, Versatility, and Construction Time.

Fabric Use

Both my Arenite Pants slim hack and Suki Robe used almost exactly 2.5 yards of fabric with almost no useable scraps left.

Versatility

The Arenite Pants will only ever be pants but, can be styled for outdoor wear year-round. They pair well with a tee shirt as lounge pants or with a dressier top as an outfit for wearing pretty much anywhere.

The Suki Robe is something I only envision wearing outside of the house in fair weather. During the summer it would make a great swim cover up and I love the idea of it as a light layer for cool evenings. However, it will likely get almost daily use as a house robe year-round. This is the first robe I’ve made and I just didn’t know how much I needed one for daily wear until now.

Construction Time

My Arenite pants came together in a flash (just over 3 hours). However, if I had felled the seams as the pattern directs, they likely would’ve taken twice as long.

The Suki Robe was a semi time consuming project for me. It took part of one evening as well as a good chunk of one day. If I had to guess, I’d say it took about 7-8 hours to sew.

There you have it. Do you have a winner in your mind? Are you team ‘Something Old’ (Arenite Pants) or team ‘Something New’ (Suki Robe)? Feel free to cast your vote in the comments section.

Thanks for reading!

Posted on

Sew Liberated Arenite Pants with Raspberry Creek Fabrics

Disclosure: The fabric used for my pants was provided to me by Raspberry Creek Fabrics. All opinions expressed here are my own.

Two blog posts in two days? Who even am I? The truth is I’m trying to squeeze in every bit of work in before my son starts summer break tomorrow. It’s been such a blessing this last school year to have a couple of hours (kindergarten is only half day here) to myself to sew and work in the middle of the day instead of late at night. It’s allowed me to connect and collaborate more without completely burning out. I don’t know what the summer holds but, hopefully I’ll still find some time to be active around these parts. Speaking of summer break, my wardrobe was in serious need of pants that don’t look like pajamas, coordinate with almost anything, AND keep me cool even when I decide to cover my unshaven legs. Enter my latest make…the Arenite Pants by Sew Liberated (I purchased my pattern through Indiesew here). Ready for all the details? Let’s do this.

Fabric

After a bit of internal debate and some time spent scouring the Raspberry Creek Fabrics website, I knew what I had to do. Is there anything that screams summer more than a good pair of linen pants? The sewist in me says “No.” For this pair I selected the Brussels Washer Linen in Leather Brown. I would characterize the actual color of this as a golden brown or toasted marshmallow, if you will. If you’re unfamiliar with the Brussels Washer Linen, it’s a lightweight rayon/linen blend. Most of the colors (check out all the colors RCF has available here), including this one, are made with two different color threads woven together which give extra dimension to the look of the fabric. It’s weight feels breezy and cool while still having just enough substance to be opaque (kind of important for pants). After the first wash it gains a perfect crinkly texture and is less scratchy than most 100% linens. Fabric spiel over. Let’s talk about this pattern.

Pattern, Sizing, and Alterations

The Arenite Pants as drafted are a bit oversized with huge slouchy pockets. I love the original design but personally don’t love too much extra bulk around my hips. Several ladies in the sewing community have been slimming down the pattern pieces and hacking them to resemble the Elizabeth Suzann Clyde Pants. THIS was a look I could get behind. Thankfully, I didn’t have to do too much in the thinking department because Meg of Sew Liberated has added the slim leg hack instructions in her Instagram highlights (find the instructions on her IG profile here).

These are the tired eyes of a mom who has been sick for a week hence, the sunglasses in most of the other photos.

I followed Meg’s hack instructions almost to the letter and it worked a treat. As per her instructions, I sized down 3 sizes (from a 12 to a 6), removed width from the side panels and pocket linings, and added length back in where needed. I made a slight deviation in adding 1.5″ to the top of the front pant, back pant, and pocket panel pieces. This raised the waist of the pants so it fits centered over my belly button and perfectly high-waisted. Long gone are my days of low-rise pants. To account for my height, I also added 1.5″ to the length at the lengthen/shorten line. I’m thrilled with the overall fit of this pair although I may opt to slim the calves just a touch more on my next pair.

Construction

I’ll admit that unless I’m unfamiliar with a technique or testing a pattern, I rarely follow instructions. For ease of construction, I opted to skip the flat fell seams and instead simply serge the raw edges and topstitch all seams down. I intended this pair to be an ace wearable muslin and didn’t want to spend twice as long making the pants if they ended up not fitting correctly. If I do use a rayon challis or tencel, I may try flat felling those seams for security. Since I didn’t flat fell the seams, these pants came together in about 3 hours. It was easy and relatively fuss-free. Perfect for a pair of pants that I plan to make again and again.

Final Thoughts

I’m currently sitting in bed still wearing my Arenite Pants. The comfort level is extreme. In fact, I could very likely sleep in these. My only qualm about the entire making process is that I definitely should’ve chosen to get 2.5 yards instead of the 2 I had. It took an epic pattern tetris battle and waistband pieced from scraps but, I made it work. The remaining fabric scraps fit in one hand. Next time I’ll save myself a bit of trouble and just order a bit more fabric.

Other than shorting myself on fabric, the process was seamless and I’m pleased with the finished product. The only slight changes I plan to make in my next pair will be slightly slimming the ankles and raising the top of the pockets by about 1 inch. I love this pair and have full faith that with the next pair I can achieve summer pant perfection.

Curious about the shirt I’m wearing here? It’s one of my tester versions of the Perkins Shirt made in a Black and White Stripe Rayon Challis that I purchased last year from Raspberry Creek. Read more about it here.

Thanks for reading!